Manufacturer of Explosion-Proof Heaters and Accessories

WMB – Wall Mounting Bracket

ActiveConversion — Wed, 13 Dec 2017 18:15:22 +0000

For use in buildings that have substantial walls. The Z sections provide additional support where necessary.

Note:

Not suitable for model SRH1-30, or HUH1-30.
When ordering mounting brackets, please specify the type of bracket preferred and the basic model code of the heater to be mounted. Example, PMB-SRH1-16.
Mounting brackets are made of steel with a black enamel paint finish.
Structural support of heater and bracket during transit is required.

ActiveConversion — Wed, 13 Dec 2017 18:14:23 +0000

For applications where the support arm can be bolted or welded directly to structural steel or concrete.

Note:

Not suitable for model SRH1-30, or HUH1-30.
When ordering mounting brackets, please specify the type of bracket preferred and the basic model code of the heater to be mounted. Example, PMB-SRH1-16.
Mounting brackets are made of steel with a black enamel paint finish.
Structural support of heater and bracket during transit is required.

ActiveConversion — Wed, 13 Dec 2017 18:13:49 +0000

For buildings with insufficient strength to use other types of mounting brackets. Requires 3 in. pipe (3.5 in. O.D., min. Sch. 40, not supplied).

Note:

Not suitable for model SRH1-30, or HUH1-30.
When ordering mounting brackets, please specify the type of bracket preferred and the basic model code of the heater to be mounted. Example, PMB-SRH1-16.
Mounting brackets are made of steel with a black enamel paint finish.
Structural support of heater and bracket during transit is required.

ActiveConversion — Wed, 13 Dec 2017 18:12:13 +0000

Ideal and economical if adequate overhead structure exists. Requires 1/2 in. pipe, cut and threaded (min. Sch. 40, not supplied).

Note:

When ordering mounting brackets, please specify the type of bracket preferred and the basic model code of the heater to be mounted. Example, PMB-SRH1-16.
Mounting brackets are made of steel with a black enamel paint finish.
Structural support of heater and bracket during transit is required.

Darren — Thu, 06 Apr 2023 20:06:38 +0000

Swivels 360 degrees and can be used if adequate overhead structure exists. Requires 1/2 in. pipe, cut and threaded (min. Sch. 40, not supplied).

Note:

When ordering mounting brackets, please specify the type of bracket preferred and the basic model code of the heater to be mounted. Example, PMB-SRH1-16.
Mounting brackets are made of steel with a black enamel paint finish.
Structural support of heater and bracket during transit is required.